Real-time ripening gas monitoring
Quickly and confidently assess ethylene levels from 0-1000 ppm.
Controlled Atmosphere Facilities
QA assessment in bagged and packaged ripening systems throughout the supply chainRipening Rooms
Measure in the room or connect via external ports for precision ripening control and inspection on bananas and other high-ethylene commoditiesModified Atmosphere Packaging
QA assessment in bagged and packaged ripening systems throughout the supply chain
Advancing apple quality assessment with the Felix Produce Quality Meter
Developing an accurate predictive apple quality model is no easy task, but Bart Nicolai and his research team at KU Leuven are cracking the code using the F-750 Produce Quality Meter. In over 20 years of research employing near-infrared technology, Mr. Nicolai has used or profiled nearly every NIR tool on the market. His… Continue reading…
View the full story here....
Gas analysis to extend shelf life in sweet potato
Partnering with the Council for Scientific and Industrial Research – Savanna Agricultural Research Institute, Issah Sugri and his team are using the F-900 Portable Ethylene Analyzer to glean crucial insights into important commodities in Ghana. Armed with this data, the team is able to advise farmers and policy makers on low-cost methods to decrease postharvest losses and increase economic prosperity in the region.
View the full story here....
Revolutionizing the Mexican mango industry
Extensively utilizing the F-751 Mango Quality meter throughout Mexico, Dr. Jorge Osuna and his team at INIFAP have been able to apply and combine cutting edge technologies to give farmers new access to vital quality data about their mango crops.
View the full story here....
Building stackable models for high-efficiency breeding
Plant Geneticist Alberto De Marcos and his team at Semillas Fito are using in-depth NIRS data from the F-750 Produce Quality Meter to build and stack models of quality traits to breed better varieties of nightshade and gourd crops.
View the full story here....
Ethylene Gas Analysis & Heat Stress Treatment in Tomato Plants
Ethylene gas is produced due to stress, as it is a signaling molecule involved in stress response by plants. Hence, scientists use ethylene measurements as one of the standard procedures to monitor stress effects in crops.
View the full story here....Manage high-ethylene commodities with ease.
The Ripen It! Gas Analyzer offers unparalleled precision in measuring high-quantity ripening gasses.
Backlit LCD screen
Never struggle to see your readings, even in dimly-lit storage environments.
Lightweight & heavy duty
Individually machined in the USA, the Store It! Gas Analyzer’s highly durable, aluminum construction gives you peace of mind without sacrificing weight.
Automated data capture
Never lose a data point with up-to-the-second autosave.
Internal data logging
Store and review thousands of records on the Three Gas Analyzer’s removable 16gb SD card.
Request a live demonstration
Easily gather data for better ripening decisions
All-day battery life
With an 8.5 hour battery life and rechargeable 3400 mAh replacement batteries included, you can work confidently without interruption.
Painless data transfer
With bluetooth and WIFI capabilities, rapid data transfer has never been easier.
Remove non-ethylene hydrocarbons
Achieve pinpoint accuracy in your ethylene readings with the PolarCept! water filter.
User-selected sampling modes
Choose from headspace or continuous sampling depending on your unique needs.
Wide temperature and humidity range
Gather reliable data in environments ranging from 0°C – 50°C and 0 – 90% non-condensing humidity.
5 data points recorded
Each sampling event records CO2 concentration, O2 concentration, date & time, RH, and GPS location.
-
Is the Ripen It! Gas Analyzer waterproof?
-
The Ripen It! Gas Analyzer is not designed to be waterproof and should not be used underwater. The Ripen It! Gas Analyzer is designed to be water-resistant. Use in light rain is fine, however, there are electronics inside of the Ripen It! Gas Analyzer that can be damaged from water entering the instrument, so it is not recommended to use the Ripen It! Gas Analyzer during heavy rainfall.
-
What are the operating conditions of this product?
-
The operating conditions of the Ripen It! Gas Analyzer are 0°C – 50°C and 0 – 90% non-condensing humidity.
-
How many measurements can the included SD card hold?
-
The included 16gb SD card can hold approximately 60 million measurements. If saving data every minute, that equates to approximately 40,000 days of measurement before the SD card is full.
-
What types of tubing materials are recommended to avoid outgas interference.
-
Viton and Teflon have successfully been found not to outgas.
Have additional questions?
Click the link below to speak with one of our staff scientists about your specific application.
Specifications
Trigger Mode Measurements C2H4
| Sensor Type: | Electrochemical |
| Range: | 0-1000 ppm |
| Resolution: | 1 ppm |
| Lower Detection Limit: | 10 ppm |
| Sampling Volume: | 35 ml |
| Response Time: | 35 seconds |
| Offset Calibration: |
Weekly |
| Sensor Replaceable (by user): |
Yes |
| Accuracy (absolute): | 10 ppm |
| Accuracy (relative): | 5% |
| Span Calibration: | 3 months |
| Lifetime: | 1 years |
Trigger Mode Measurements CO2
| Sensor Type: | Infrared Sensor, Pyroelectric detector |
| Range: | 0-100% |
| Resolution: | 0.01% |
| Lower Detection Limit: | 0.50% |
| Sampling Volume: | 12 ml |
| Response Time: | 12 seconds |
| Offset Calibration: |
Weekly |
| Sensor Replaceable (by user): |
No |
| Accuracy (absolute): | 0.50% |
| Accuracy (relative): | 2% |
| Span Calibration: | 12 months |
| Lifetime: | 5 years |
Trigger Mode Measurements O2
| Sensor Type: | Electrochemical |
| Range: | 0-100% |
| Resolution: | 0.10% |
| Lower Detection Limit: | 0.30% |
| Sampling Volume: | 12 ml |
| Response Time: | 12 seconds |
| Offset Calibration: |
Weekly |
| Sensor Replaceable (by user): |
Yes |
| Accuracy (absolute): | 0.30% |
| Accuracy (relative): | 3% |
| Span Calibration: | 6 months |
| Lifetime: | 2 years |
Continuous Mode Measurements C2H4
| Sensor Type: | Electrochemical |
| Range: | 0-1000 ppm |
| Resolution: | 1 ppm |
| Lower Detection Limit: | 2 ppm |
| Response Time: | 90 seconds |
| Offset Calibration: | Weekly |
| Sensor Replaceable (by user): | Yes |
| Accuracy (absolute): | 2 ppm |
| Accuracy (relative): | 5% |
| Span Calibration: | 3 months |
| Lifetime: | 1 years |
Continuous Mode Measurements CO2
| Sensor Type: | Infrared Sensor, Pyroelectric detector |
| Range: | 0-100% |
| Resolution: | 0.01% |
| Lower Detection Limit: | 0.01% |
| Response Time: | 6 seconds |
| Offset Calibration: |
Weekly |
| Sensor Replaceable (by user): |
No |
| Accuracy (absolute): | 0.01% |
| Accuracy (relative): | 3% |
| Span Calibration: | 12 months |
| Lifetime: | 5 years |
Continuous Mode Measurements O2
| Sensor Type: | Electrochemical |
| Range: | 0-100% |
| Resolution: | 0.10% |
| Lower Detection Limit: | 0.10% |
| Response Time: | 12 seconds |
| Offset Calibration: | Weekly |
| Sensor Replaceable (by user): | Yes |
| Accuracy (absolute): | 0.10% |
| Accuracy (relative): | 2% |
| Span Calibration: | 6 months |
| Lifetime: | 2 years |
F-960 Set-Zero (O2)
F-960 Set-Zero (CO2)
F-960 Set-Zero (C2H4)
F-960 Span Calibration
Standard Gas Tank Attachment Tutorial
Felix Instruments Handheld Gas Analyzer Series Live Training
Real-time ripening gas monitoring.
Quickly and confidently assess ethylene levels from 0-1000 ppm.
F-900DK Dynamic Sampling Kit
The Dynamic Sampling Kit allows users to take continuous measurements in closed environments with any of our handheld gas analyzers. The kit includes an acrylic chamber, wand attachment, and battery pack.
9XX BE Battery Eliminator for Handheld Gas Analyzers
The Battery Eliminator allows for instruments to operate on AC power. Compatible with F-920, F-940, F-950, and F-960 gas analyzers.
Request a quote for a F-960 Ripen It! Gas Analyzer
Pricing and all related materials will be sent directly to your inbox.
