F-950 Three Gas Analyzer
Gather ethylene, CO2 and O2 data in seconds with the Felix Instruments Three Gas Analyzer.
Easily maintain optimal produce quality
Versatile ethylene measurement from 0-200 ppm.
Controlled Atmosphere Facilities
Monitor ethylene mitigation and maintain the proper balance of gasses in controlled atmosphere environments.Ripening Rooms
Precision citrus degreening and ripening control on various commodities.Modified Atmosphere Packaging
QA assessment in packing lines, laboratories, import/export surveys, distribution centers and retail centers.
Advancing apple quality assessment with the Felix Produce Quality Meter
Developing an accurate predictive apple quality model is no easy task, but Bart Nicolai and his research team at KU Leuven are cracking the code using the F-750 Produce Quality Meter. In over 20 years of research employing near-infrared technology, Mr. Nicolai has used or profiled nearly every NIR tool on the market. His… Continue reading…
View the full story here....
Gas analysis to extend shelf life in sweet potato
Partnering with the Council for Scientific and Industrial Research – Savanna Agricultural Research Institute, Issah Sugri and his team are using the F-900 Portable Ethylene Analyzer to glean crucial insights into important commodities in Ghana. Armed with this data, the team is able to advise farmers and policy makers on low-cost methods to decrease postharvest losses and increase economic prosperity in the region.
View the full story here....
Revolutionizing the Mexican mango industry
Extensively utilizing the F-751 Mango Quality meter throughout Mexico, Dr. Jorge Osuna and his team at INIFAP have been able to apply and combine cutting edge technologies to give farmers new access to vital quality data about their mango crops.
View the full story here....
Avocado quality measurement without the microwave
Looking to the F-751 for efficient, non-destructive dry matter measurement, Mission Produce employs cutting-edge NIR technology in critical locations around the globe to ensure the highest avocado quality while drastically reducing testing time
View the full story here....
Building stackable models for high-efficiency breeding
Plant Geneticist Alberto De Marcos and his team at Semillas Fito are using in-depth NIRS data from the F-750 Produce Quality Meter to build and stack models of quality traits to breed better varieties of nightshade and gourd crops.
View the full story here....
Ethylene Gas Analysis & Heat Stress Treatment in Tomato Plants
Ethylene gas is produced due to stress, as it is a signaling molecule involved in stress response by plants. Hence, scientists use ethylene measurements as one of the standard procedures to monitor stress effects in crops.
View the full story here....Get to know your storage and ripening gasses.
Gather ethylene, CO2 and O2 data in seconds with the Felix Instruments Three Gas Analyzer.
Backlit LCD screen
Never struggle to see your readings, even in dimly-lit storage environments.
Lightweight & heavy duty
Individually machined in the USA, the Store It! Gas Analyzer’s highly durable, aluminum construction gives you peace of mind without sacrificing weight.
Automated data capture
Never lose a data point with up-to-the-second autosave.
Internal data logging
Store and review thousands of records on the Three Gas Analyzer’s removable 16gb SD card.
Request a live demonstration
Portable gas analysis for commercial and research applications
Wide temperature and humidity range
Achieve pinpoint accuracy in your ethylene readings with the PolarCept! water
filter.
Remove non-ethylene hydrocarbons
Achieve pinpoint accuracy in your ethylene readings with the PolarCept! water
filter
All-day battery life
With an 8.5 hour battery life and rechargeable 3400 mAh replacement batteries
included, you can work confidently without interruption.
User-selected sampling modes
Choose from headspace or continuous sampling depending on your unique
needs.
5 data points recorded
Each sampling event records CO2 concentration, O2 concentration, date & time,
RH, and GPS location.
Painless data transfer
With bluetooth and WIFI capabilities, rapid data transfer has never been easier.
-
Does this product come with a warranty?
-
All devices from Felix Instruments – Applied Food Science come with a 12-month warranty at the point of sale. The warranty covers repairing and replacing defective parts of the instrument that were manufactured directly by Felix Instruments. The warranty does not cover wear and tear, neglect, misuse, accident, or excessive deterioration. Further, unauthorized repair and alteration by an unauthorized party voids the warranty. More information can be found in the operation manual of your instrument.
-
Is the Three Gas Analyzer waterproof?
-
The Three Gas Analyzer is not designed to be waterproof and should not be used underwater. The Three Gas Analyzer is designed to be water-resistant. Use in light rain is fine, however, there are electronics inside of the Three Gas Analyzer that can be damaged from water entering the instrument, so it is not recommended to use the Three Gas Analyzer during heavy rainfall
-
What are the operating conditions of this product?
-
The operating conditions of the Ripen It! Gas Analyzer are 0°C – 50°C and 0 – 90% non-condensing humidity.
-
How many measurements can the included SD card hold?
-
The included 16gb SD card can hold approximately 60 million measurements. If saving data every minute, that equates to approximately 40,000 days of measurement before the SD card is full.
-
What types of tubing materials are recommended to avoid outgas interference?
-
Viton and Teflon have successfully been found not to outgas.
Have additional questions?
Click the link below to speak with one of our staff scientists about your specific application.
Specifications
Trigger Mode Measurements C2H4
| Sensor Type: | Electrochemical |
| Range: | 0-200 ppm |
| Resolution: | 0.1 ppm |
| Lower Detection Limit: | 0.15 ppm |
| Sampling Volume: | 35 ml |
| Response Time: | 35 seconds |
Offset Calibration: WeeklySensor Replaceable (by user): yes
| Accuracy (absolute): | 2 ppm |
| Accuracy (relative): | 5% |
| Span Calibration: | 3 months |
| Lifetime: | 2 years |
Trigger Mode Measurements CO2
| Sensor Type: | Infrared Sensor, Pyroelectric detector |
| Range: | 0-100% |
| Resolution: | 0.01% |
| Lower Detection Limit: | 0.50% |
| Sampling Volume: | 12 ml |
| Response Time: | 12 seconds |
Offset Calibration: WeeklySensor Replaceable (by user): no
| Accuracy (absolute): | 0.50% |
| Accuracy (relative): | 3% |
| Span Calibration: | 12 months |
| Lifetime: | 5 years |
Trigger Mode Measurements O2
| Sensor Type: | Electrochemical |
| Range: | 0-100% |
| Resolution: | 0.10% |
| Lower Detection Limit: | 0.30% |
| Sampling Volume: | 12 ml |
| Response Time: | 12 seconds |
Offset Calibration: WeeklySensor Replaceable (by user): yes
| Accuracy (absolute): | 0.30% |
| Accuracy (relative): | 2% |
| Span Calibration: | 6 months |
| Lifetime: | 2 years |
Continuous Mode Measurements C2H4
| Sensor Type: | Electrochemical |
| Range: | 0-200 ppm |
| Resolution: | 0.1 ppm |
| Lower Detection Limit: | 0.2 ppm |
| Response Time: | 80 seconds |
Offset Calibration: WeeklySensor Replaceable (by user): yes
| Accuracy (absolute): | 0.2 ppm |
| Accuracy (relative): | 5% |
| Span Calibration: | 3 months |
| Lifetime: | 2 years |
Continuous Mode Measurements CO2
| Sensor Type: | Infrared Sensor, Pyroelectric detector |
| Range: | 0-100% |
| Resolution: | 0.01% |
| Lower Detection Limit: | 0.01% |
| Response Time: | 6 seconds |
Offset Calibration: WeeklySensor Replaceable (by user): no
| Accuracy (absolute): | 0.01% |
| Accuracy (relative): | 3% |
| Span Calibration: | 12 months |
| Lifetime: | 5 years |
Continuous Mode Measurements O2
| Sensor Type: | Electrochemical |
| Range: | 0-100% |
| Resolution: | 0.10% |
| Lower Detection Limit: | 0.10% |
| Response Time: | 12 seconds |
Offset Calibration: WeeklySensor Replaceable (by user): yes
| Accuracy (absolute): | 0.10% |
| Accuracy (relative): | 2% |
| Span Calibration: | 6 months |
| Lifetime: | 2 years |
F-950 Set-Zero (O2)
The F-950 Three Gas Analyzer measures levels of Ethylene, CO2 and O2 to maintain optimal produce quality at every phase of the supply chain.
F-950 Set-Zero (CO2)
The F-950’s versatile design allows it to be be scaled to many environments, from cold storage to transportation container.
F-950 Set-Zero (C2H4)
Simple to operate and weighing less than a kilogram, the F-950 uses an electrochemical cell to measure ethylene between 0-200 ppm.
F-950 Span Calibration
The F-950 is ideal for measuring ethylene production across a wide range of fruit types.
Standard Gas Tank Attachment Tutorial
Versatile ethylene measurement from 0-200 ppm.
F-950 Three Gas Analyzer
Versatile ethylene measurement from 0-200 ppm.
Easily maintain optimal produce quality.
Gather ethylene, CO2 and O2 data in seconds with the Felix Instruments Three Gas Analyzer.
Request a quote for a F-950 Three Gas Analyzer
Pricing and all related materials will be sent directly to your inbox.
